| |
|
|
Q: |
My module won’t do anything at all |
| |
Verify that the module is receiving power & ground.
Verify that the interface module are correctly connected and there are no bent pins in the sockets.
Disconnect the vehicle battery for one minute to reset the onboard PTIM. |
Q: |
The headlight flasher shuts off when in park regardless of switch settings to enable / disable park kill option |
| |
Ensure that the orange/black wire is not connected to a circuit controlled by the park kill circuit.
|
Q: |
I’m using an ignition security system, designed to keep the engine running without the key. I used the “brake” sense option but it won’t work properly.
|
| |
Most ignition security products using the brake signal sense needs to “see” a ground path thru the brake circuit to activate the system. The EVM-DCIM3 (E) only provides a positive signal when brake is supplied. Relocate the ignition security product brake sense wire to the actual brake circuit.
|
Q: |
Head lights and/or tail lights has a delayed response to being turned off.
|
| |
Powering multiple devices with a common control lead may cause one or more units to briefly remain functional after power is removed. Isolate the other devices from the module to see if the problem is resolved. If it is resolved, install a relay to isolate the offending device. |
|
| |
|
